Silk All In One Mineral Paint

A new all-in-one paint, from Dixie Belle Paint Company. Silk mineral paint features a built-in primer as well as topcoat.

PREP for SILK is as follows.

"LIGHT scuff sanding for excellent results".

ALL pieces need to have a scuff sand, if you have clients that do not understand what scuff sand means tell them take a 220 sanding block (DB sanding pad) and lightly scuff the surface of their piece. Wipe away the dust with a microfiber cloth or paper towel and clean with white lightning. 

Tips for using Silk Mineral All In One Paints:

De-gloss ALL pieces with a light scuff sanding,
Clean Well with White Lightning, rinse residue
Remove any wax before getting started.
Factory finishes, lacquer, laminate, glass, or plastic require light scuff sanding and Slick Stick for proper adherence
For increased durability, apply 2 coats of paint.
Apply with a Dry Synthetic Brush
Built-in topcoat, primer, and water-based stain blocker
Cooler temperatures or higher humidity may prolong drying time
Stays looking new longer and requires fewer coats
Full coverage and strong coating
Low reflective finish\
Excellent durability
Washable for an easy - clean finish
Water, Mildew and Grease Resistant
21 to 30 Day Cure Time
Viscosity might vary depending on pigments
Do not thin Silk unless using a sprayer
Store between 50-90°F (10-32°C.)
If you thin out Silk only recommend using water/Floetrol of no more than 8 ounces per gallon.